Concrete
forms
The
WatrLevel is excellent for making concrete forms. You can use
it to build the form and then check your work before pouring even
if the form is sloped, complicated, or partially out-of-sight.
|
Deck
building
The
WatrLevel is particularly suited to deck building, especially
since the WatrLevel can be used around corners and by one person.
|
Lawns
It's
surprising but getting a lawn level isn't all that easy, there's
really nothing made that is inexpensive, easy to use, requires
one person, and is fast - except the WatrLevel.
|
Home
Inspection
The
WatrLevel is a valuable tool for Home Inspectors, it makes it
very easy to determine if there is sinkage anywhere in the house
(since the WatrLevel works so well around corners).
|
Fence
building
A
real advantage of the WatrLevel is it's ability to works in all
directions.
|
Setting
deck blocks
The
WatrLevel won't help to layout those blocks but it can easily
tell you how high or low each one is, click here for an example.
|
Step
work
Yes,
the WatrLevel is also excellent for step work since it is so
good with vertical measurements.
|
Stepped
fence building
Stepped
fences are a snap with the WatrLevel.
|
Brick
work
The
WatrLevel is excellent for brick work, whether it's the wall
portion or the posts.
|
Posts
Finding
the level point on a series of posts is very easy - even on
a slope or if you don't have line-of-sight.
|
Rain
gutters
Since
the WatrLevel can be used either up or down it's perfect for
leveling gutters. Nothing's worse than a rain gutter
with a low spot ...
|
Kitchen
cabinets
The
WatrLevel makes it real easy to set kitchen cabinets.
|
Ponds
As
you can imagine, the WatrLevel is a perfect match for pond building
- after all it's water-based leveling tool.
|
Equipment
leveling
Leveling
unusual or shaped pieces of equipment is an ideal use of the WatrLevel.
|
Painting
Snapping
a line to paint a stripe on the outside or inside of a building
is also easy with the WatrLevel.
|
Aircraft
construction
Another
unusual use, aircraft construction, particularly leveling the
wings. Water levels have long been used for this.
|
Siding
Installing
siding is a snap because the WatrLevel works around corners
and requires only one person to use.
|
Mobile
home leveling
Leveling
a mobile home has never been easier than with a WatrLevel.
|
Window
& doors
The
WatrLevel is the only tool that can mark both sides
of a wall to cut-in a door or window.
|
Drain
slope
Sometimes
drains slope can be deceiving - it looks right but it isn't.
(picture is the inventor actually using the WatrLevel).
|
T-bar
Installation
The
WatrLevel works great for marking the lines for the T-bar - remember
line-of-site is not needed.
|
Mapping
Since
the WatrLevel measures vertically, it can provide the "Z"
in the X, Y, and Z needed to make a contour map. Why
pay for an expensive survey when you can do it yourself with a
tape measure and a WatrLevel?
|
Archeology
One
use for the WatrLevel that seems taylor-made is for archeology/anthropology/geology.
Mapping a excavation is extremely important, with a tape
measure and a WatrLevel this can be done easily and accurately.
Also, no need to worry about that expensive equipment in
the field.
|
Store
shelving
It
may seem like an unlikely use for the WatrLevel but I have first-hand
knowledge of how wells it works. I used it to level a
large gondola system that was on a sloping floor, all I had
to do was check each leg and I instantly knew how big of a block/shim
to cut for that leg.
|
Cut
& fill
Again,
since the WatrLevel can measure vertically it is possible to
calculate the amount of cut or fill needed.
|
Grading
The
WatrLevel be used to stake grading and then to check your work
- fast and easily.
|
Walkways
Walkways
are easy to check with the WatrLevel, ensuring proper slope.
|
|
